Cl, K, Si, Mg, Al, S, P, Ca, Fe in cement and Limestone
Upper-illuminated optical path structure
High precision, good stability, simple operation
Test results close to wet chemical method testing
Only a few minutes to analyze dozens of elements in a sample
Summary：
The P9800S Cement Analyzer is X-ray Fluorescence for everyone in the cement industry to analyze nine elements (Cl, K, Si, Mg, Al, S, P, Ca, Fe) in cement raw clinker at one time and automatically calculate the elemental composition of raw materials. This product is the only one in China that adopts the upper-illuminated optical path structure, which overcomes the problem of powder-like ash pollution detector and light pipe, improves measurement accuracy and is easy to do maintain. It has a sample liftable test platform and a sample spin system, the lifting platform automatically puts down the sample at the end of the measurement to facilitate the replacement of the sample, and the X-ray does not illuminate the person, which is safe and reliable. With a monitored sample spin system, the measurement deviation caused by sample non-uniformity can be eliminated and the stability of the measurement can be improved.
Applications：
Cement manufacturing industry: raw materials, raw materials, clinker, cement and other ingredients analysis;
Limestone industry: Limestone various composition analysis.
Parameter：
|
Elemental analysis range |
(Na) — (U) |
|
Content analysis range |
1PPM-99.99% (Different element content ranges) |
|
Measure time |
30-200 Seconds |
|
Detector |
Electric Refrigeration Fast-SDD Semiconductor Detector |
|
Instrument resolution |
(127±5) eV |
|
Multichannel analyzer |
2048 |
|
Input voltage |
AC 220V±10%, 50HZ |
|
Environment humidity |
30%--80% |
|
Pulse forming |
Triangular pulse shaping, pulse forming time≤2μS, Pulse mode and line mode freely interchangeable |
|
Differential nonlinearity |
＜0.1% |
|
Integral nonlinearity |
＜0.01% |
|
Vacuum pump rated power |
550W |
|
HD CCD |
5 million pixels |
|
Round sample vacuum chamber |
240*83mm |
|
Grouped equipment |
1 set of regulated power supply matching the power of the equipment |
|
Programmed gain control, 1-65535 level fine adjustable |
|
|
10 seconds vacuum10-2pa (High vacuum area 10-5pa) |
|
|
Automatically switch filters |
|
|
Fully digital multichannel spectrometer |
|
|
Own database management system |
|
|
Users can increase the sample type and type according to their needs, without software restrictions |
|
Cl, K, Si, Mg, Al, S, P, Ca, Fe in cement and Limestone
Upper-illuminated optical path structure
High precision, good stability, simple operation
Test results close to wet chemical method testing
Only a few minutes to analyze dozens of elements in a sample
Cl, K, Si, Mg, Al, S, P, Ca, Fe in cement and Limestone
Upper-illuminated optical path structure
High precision, good stability, simple operation
Test results close to wet chemical method testing
Only a few minutes to analyze dozens of elements in a sample
Cl, K, Si, Mg, Al, S, P, Ca, Fe in cement and Limestone
Upper-illuminated optical path structure
High precision, good stability, simple operation
Test results close to wet chemical method testing
Only a few minutes to analyze dozens of elements in a sample
Metallographic hot mosaics are suitable for different types of mosaics to do sample mosaics, in order to test the hardness of small workpieces and observe the metallographic structure. The Mosaic powder can be prepared by the Mosaic machine sample preparation for 8-15 minutes, the heat preservation is 140-180℃, the Mosaic pressure is 30±3MPa, and the sample preparation can be completed.
Fast. Durable. Accurate.
Reliable, high-productivity metal grade analysis in only 1 second for most alloys
Idea for scrap metals sorting
Positive Material Identification (PMI)
Safe and nonradiative
Low owner cost
Especially for aluminium alloy grade and composition analysis
The product is refined from imported raw materials. During the production process of printed circuit boards, in order to monitor the thickness of the coating in the PTH hole, the line etching side etching rate, etc., metallographic section microanalysis must be performed. It is a special chemical product for metallographic slice molding using acrylic resin as the main raw material. It has excellent properties such as smooth and fast curing at room temperature, few bubbles, no discoloration after long-term storage, high hardness, and acid and alkali resistance.
TY-9900 Inductively Coupled Plasma Atomic Emission Spectrometer (ICP-AES)
Wavelength range:195-800nm
For 70 trace elements and macroelements
Analyze up to 600 samples per day
Low operating costs
Intuitive operation
Ultra-low limits of detection
Ultra-high speed of measurement
High resolution CMOS readout system
Low total cost of ownership
Vacuum optics enabling fast stabilization
Excellent long-term stability
Intelligent design, Modular design
Ferrous and non-ferrous applications
Easy to use with full PC control
Friendly user interface
© Copyright © 2025 Wuxi Jinyibo Instrument Technology Co.,Ltd All Rights Reserved.
Sitemap | Xml | Privacy Policy |
苏ICP备18046951号-1
