Carbon Sulphur Analyzer is of Great Significance to the Quality and Performance of Steel
CS-8820S Carbon Sulphur Analyzer is a analytical equipment which can analyze Carbon & Sulfur elements. It can quickly and accurately determine the mass fractions of carbon and sulphur in steel, iron, alloys, non-ferrous metals, cement, ore, glass, coal, coke, catalysts and other solid material.
The carbon and sulphur content plays an important role in the quality and performance of steel. Therefore, to detect the carbon and sulphur content in steel, the CS-8820S Carbon Sulphur Analyzer is of great significance.
As the carbon content increases, the hardness and strength of the steel increase, and its toughness and plasticity decrease. Conversely, as the carbon content decreases, the hardness and strength decrease, while the toughness and plasticity increase. Sulfur is present in steel, which will deteriorate the quality of steel and reduce its mechanical properties, corrosion resistance and weldability.
Especially the sulphur in steel, if it exists in the state of iron sulfide, due to its low melting point (about 1000 ℃), will cause the steel "hot brittle" phenomenon, that is, thermal deformation, high temperature work cracks, which affects the product Quality and service life. Therefore, the lower the sulfur content in steel, the better. As a general requirement, the sulphur content in ordinary steel is less than 0.050%, the sulphur content in tool steel is less than 0.045%, and the sulphur content in high-quality steel is less than 0.020%.
CS-8820S Carbon Sulphur Analyzer is a commonly used measuring instrument in the physical and chemical analysis room of enterprises, used for quantitative analysis of the content of carbon and sulfur in metal and non-metal materials, It is widely used in industries and fields such as metallurgy, casting, machinery, vehicles, pumps, ores, environmental protection, quality inspection, etc. It is convenient and fast to carry out analysis and testing in the stages of raw material acceptance, pre-furnace analysis and finished product inspection.