JINYIBO brings the latest Expert-1 Handheld LIBS Analyzer to the 18th China International Foundry Expo (Metal China)
The 18th China International Foundry Expo (Metal China) and the 14th China International Die Casting Industry Exhibition will kick off at the National Exhibition and Convention Center (Shanghai) from 18 to 20, August, 2020.
As we all know, the China International Foundry Expo is a weather vane for the development of the foundry and die-casting industry and a large stage for the demonstration of corporate strength. For this reason, JINYIBO attaches great importance to this casting and die-casting event.
Therefore, JINYIBO mobilized the product development department, marketing planning department, and domestic and foreign sales department elites to establish this exhibition. In this exhibiton, in addition to exhibting Optical Emission Spectrometers, Carbon & Sulfur Analyers, and other analytical instruments, meanwhile, we will also grandly launch the newely developed Expert-1 Handheld LIBS Analyzer. Let visitors and partners know more about JINYIBO. At that time, friends and partners from all walks of life are welcome to come to the Jinyibo booth for on-site communication and negotiation. Booth No.: 2C56
Expert-1 LIBS uses a high-energy focused pulsed laser beam to excite the surface of the sample, and analyzes the generated atomic spectrum through an algorithm to obtain the corresponding element composition and content. This is a fast qualitative and quantitative analysis technology for industrial application.
Expert-1 LIBS is a metal analyzer with the fastest scrap sorting speed in the world. Just pull the trigger and the results will be displayed on the screen after one second, it can be used for a long time even under the harshest scrapyard conditions. Expert-1 LIBS can identify and analyze various alloys, it has the content range of common alloys including aluminum, magnesium, titanium, cobalt, chromium, nickel, and copper alloys, as well as stainless steel, tool steel, low alloy steel, etc.
Analyze a Wider Range of Alloys
Using Expert-1 LIBS means you can identify and analyze a wider range of alloys, the instrument can give results for all common alloys. Applying Expert-1 LIBS means analying all common alloy types, including heavy alloys and light alloys. Many similar products can only analyze and identify light alloys, such as aluminum, magnesium and titanium alloys.
Compare with HHXRF
Expert -1 LIBS
Handheld XRF Spectrometer
Without any ionizing radiation,
3B human eye safety laser.
With X photoionizing radiation, safety protection is required during use, and employees must undergo strict training before starting operation.
Out-of-the-box, results in one second
Long test time, each test takes 10-60 seconds.
There are no vulnerable parts, the service life of core components exceeds one million tests, and the maintenance cost in normal use is extremely low
X-ray tubes and detectors are both vulnerable parts, which are expensive to replace. The average life of the X-ray tube is 5 years, so the replacement of the two parts is 8000.00 USD.
Covers almost all metal elements and can be used to identify grades and components.
Important for the identification of heavy metal elements, such as stainless steel, alloy steel, but not suitable for testing all light elements such as Mg, Al
Degree of Sample Damage
After the test, a burn mark with a diameter of about 0.1mm and a depth of 20ɥm will be left
Non-destructive or no trace after testing.